FLUID DISTRIBUTION MANIFOLDS

FOR GAS OR LIQUID

Plastic manifolds made from acrylic or clear PVC have many advantages over metal manifolds

ADVANTAGES

Lightweight

Compact

Corrosion resistant

Clear plastic allows inspection of fluid paths

Allows complex fluid paths that would be impossible to machine with metal manifolds

Use with air or liquid, up to 150 psi.

---

Standard Fluid Distribution Manifold

CNC Machining: Threaded and clearance holes are machined in the top layer, and the fluid-path grooves are machined in the bottom layer. Choose either clear acrylic or clear PVC.	Solvent Bonding: MicroAdvances exclusive low temperature bonding method allows for tight tolerancing. The end result actually fuses the plastic layers into one solid plastic piece.	Annealing, polishing After bonding, the manifold is annealed for stress-free operation, and then polished to a crystal clear finish. Add your own fittings to meet your design requirements.

 

MicroAdvances Standard Distribution Manifold allows up to 22 fittings with 10-32 (or M5) threads. Choose your own fluid path and the number of fittings.

 

The following shows the basic dimensions with example fluid paths:

 

Our standard distribution manifold covers most air and liquid distribution needs. Specify your own fluid path interconnections and groove widths and MicroAdvances can manufacture it for you.

If you need a special design outside the range of our standard manifolds, submit your design to MicroAdvances. Look at our Design Guide for maximum and minimum dimensions and design possibilities. We can manufacture distribution manifolds with up to 6 layers!

For inquiries and price quotes, please contact us .

 

MicroAdvances, Inc. | 6073 N.W. 167 St., Bldg. C-21 | Miami, FL 33015 | Tel: 305-556-4801, Toll Free: 877-62MICRO, Fax: 877-60MICRO